How To Install Safety 1st Cabinet And Drawer Latches

As a parent to a young child or young children, one of your prerogatives is the safety of your child or children.

Most parents would say that one way to ensure their child’s or children’s safety is to install cabinet and drawer latches. They often prefer the cabinet and drawer latches from safety 1st, called safety 1st cabinet and drawer latches.

The question becomes how to install safety 1st cabinet and drawer latches, don’t worry. 

This article provides a practical and straightforward guide for you and after which you will be able to install yours effortlessly.

Table of Contents

Safety 1st Cabinet and Drawer Latches

The safety 1st cabinet and drawer latches refer to a cabinet and drawer latches produced by Safety 1st company.

A cabinet or drawer cabinet will allow you to keep your little one out of an area that may be considered off-limits in your home. And since children are often curious, their actions sometimes are spontaneous or out of impulse.

They have the unique ability to install easily inside your drawer and cabinet while remaining invisible to visitors who may be passing through that area.

The safety 1st cabinet and drawer latches have a wide, easy-grip surface, allowing for easy parental access.

It comes in 14 packs and will help you secure many cabinets and drawers within your home, making it budget-friendly and cost-effective.

The cabinet and drawer latches, by safety 1st, are strong enough to prevent even the cleverest toddler from accessing the lock with it. The products are toddler tested and durable.

Features Of Safety 1st Cabinet and Drawer Latches

The cabinet and drawer latches by safety 1st have the following features and include:

  • They have a wide easy to grip surface, which is necessary and enables quick parental access
  • They are always simple to install and easy to use as well
  • They prevent children from opening and accessing drawers and cabinets effectively
  • Great mechanical pull force strength

Why Should You Install Safety 1st Cabinet and Drawer Latches?

The primary reason why you would want to install a safety 1st cabinet and drawer latches is the safety of your child or children.

At that stage in their lives, your kids are curious. They want to explore and survey their environments.

And if not guided, they can injure themselves by accessing places they are not supposed to access, and the after-effect might be too drastic or disastrous to handle. It could even lead to death.

Most parents utilize the safety 1st cabinet and drawer latches to prevent these things from passing.

They are designed to help toddlers avoid harm and even protect curious kids by serving as a hindrance or obstacle to their adventure, which entails opening cabinets and drawers.

One beautiful thing about these cabinet and drawer latches is that they are easy to install and require little or no tools.

How To Install Safety 1st Cabinet And Drawer Latches (Adhesive)

Installation of adhesive cabinet and drawer latches by safety 1st isn’t tedious, and you can get it done in a matter of minutes.

All you have to do is identify where you want the installation of your cabinet and drawer latches to be. Please ensure they are clean and dry, and then ensure that there is no debris or dirt before proceeding.

  1. The most important is to identify where you want the installation to take place and ensure that they are dry, clean, and then debris or dirt free.
  2. Once the installation spot has been determined, you next clean the site with a mild soap and water solution and ensure that it is dry before proceeding to the next step.
  3. Peel away the back from one of the adhesive strips on the latch and if there are two strips, peel both backs halfway. Afterward, you position the latch inside the cabinet drawer so that the adhesive strips touch the surface, and then you secure the latch by pressing it down.
  4. Repeat from step2-4 until you have installed all the latches you want to install. Allow the adhesive sets to stay for at least 24 hours before you begin to use the drawers or cabinets.
  5. Once you are sure that it is up to 24 hours, you should test the latches and ensure they are secure. Then try opening and closing the cabinets and drawers several times to ensure that the latches are strong and in place.

How To Install Safety 1st Magnetic Cabinet and Drawer Latches

Another product by the safety 1st company that you can use to childproof your cabinet and drawer is magnetic latches.

The beautiful thing about this particular one is that they do not require any installation tool and can be used on any cabinet or drawer.

They work by using powerful magnets to keep the doors of your cabinets or drawers closed. Below are the steps to use when installing them.

  1. Peel off the adhesive strips and attach them to the inside of your cabinet or drawer
  2. Ensure that the magnets are in position before attaching them
  3. Once the latches are in place, you can test them by opening and closing the door to be sure that it is secure.

How To Install Safety 1st Non-Adhesive Cabinet and Drawer Latches

This product comes with a template and the screws for correct installation. You only need a pencil for marking screw placements, a drill, and a Philips head screwdriver with a short handle.

To install it correctly, follow the steps below.

  1. Mark the area in your drawer or cabinet where you want the installation to occur.
  2. Drill holes on the drawer and cabinets about 3/8 inch deep
  3. Using the screwdriver, fix the screws on the latches on the drawer and cabinet.
  4. Once the latches are in place, you can test them by opening and closing the door to be sure that it is secure.

Still, finding it difficult to install safety 1st cabinet and drawer latches? Here is an installation guide video for you.

Related Posts:

Conclusion

Hopefully, this article has given an in-depth discussion to answer your question on how to install safety 1st cabinet and drawer latches. As you can see, the job is not as tedious as you think the installation will be.

Remember that the safety of your child or children is your priority, and you need to do everything possible to ensure that they are safe. 

Thankfully, one of the ways you can achieve this is by installing cabinet and drawer latches from safety 1st. The latches are easy to install and can be used on any surface, curved or flat.

Do not forget to test it after installation to ensure they are secure.